Hp Smart Array P830 Controller Uživatelský manuál stáhnout pdf (Strana 21)

Drive procedures 21

Drive procedures

Identifying the status of an HP SmartDrive

HP SmartDrives are the latest HP drive technology, and they are supported beginning with ProLiant Gen8

servers and server blades. The HP SmartDrive is not supported on earlier generation servers and server

blades. Identify an HP SmartDrive by its carrier, shown in the following illustration.

When a drive is configured as a part of an array and connected to a powered-up controller, the drive LEDs

indicate the condition of the drive.

Item LED Status Definition

Locate Solid blue The drive is being identified by a host application.

Flashing blue The drive carrier firmware is being updated or requires an update.

Activity ring

Rotating green

Drive activity

Off No drive activity

Do not remove Solid white Do not remove the drive. Removing the drive causes one or more of

the logical drives to fail.

Off Removing the drive does not cause a logical drive to fail.

Drive status Solid green The drive is a member of one or more logical drives.

Flashing green

The drive is rebuilding or performing a RAID migration, strip size

migration, capacity expansion, or logical drive extension, or is

erasing.

Flashing

amber/green

The drive is a member of one or more logical drives and predicts

the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Solid amber The drive has failed.

Off The drive is not configured by a RAID controller.

The blue Locate LED is behind the release lever and is visible when illuminated.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 44 45

Žádné komentáře

Hp Smart Array P830 Controller Uživatelský manuál Strana 21