Hp Netserver L Server series Uživatelský manuál stáhnout pdf (Strana 61)

Chapter 8 Installing the NetServer in an HP Rack System/E or Rack System/U

3. Extend the slides until you hear a click, indicating they are locked. Note

that slides do not come apart.

4. Remove power supplies and hard disk drives from the server to reduce the

total weight to be lifted.

WARNING Two people are required to move or lift the NetServer. The

HP NetServer LH 4r weighs up to 176 pounds (80 kg.) when

fully loaded.

5. Lift the NetServer by the handles until the handles are above the extended

slide members (see Figure 8-9).

6. Move the NetServer toward the rack, between the slide members, until all

four NetServer handles are over the slide members. The NetServer must

be slid onto the slides through the handles. You cannot lower it onto the

slides.

Figure 8-9. Mounting the NetServer on the Slides

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 125 126

Žádné komentáře

Hp Netserver L Server series Uživatelský manuál Strana 61