Hp ProLiant DL120 G5 Server Uživatelský manuál Strana 30

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 99
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 29
Hardware options installation 30
4.
Remove the management port option cover.
5.
Using a T-15 Torx screwdriver, install the dedicated LO100c management port module.
6.
Install the primary access panel.
7.
Install the server into the rack.
8.
Connect the dedicated LO100c management port to a LAN from which the server is managed.
9.
Connect the AC power cord to the AC power source.
10.
Wait 3 minutes for LO100c firmware initialization to complete.
The dedicated LO100c management port supports DHCP-assigned and static IP addresses. To configure
network access, see the HP ProLiant Lights-Out 100 Remote Management User Guide on the HP website
(http://www.hp.com/servers/lights-out
).
Zobrazit stránku 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 98 99

Komentáře k této Příručce

Žádné komentáře