Hp ProLiant DL160 Gen8 Server Uživatelský manuál stáhnout pdf (Strana 21)

Operations 21

The air baffle slides down to a closed position.

Remove the PCI riser cage

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI riser board assembly.

1. Power down the server (on page 16).

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Do one of the following:

o Extend the server from the rack (on page 17).

o Remove the server from the rack (on page 16).

4. Remove the access panel (on page 19).

5. Remove the processor air baffle (on page 20).

6. Disconnect all cables connected to any existing expansion boards.

7. Remove the PCI riser cage:

a. Unfasten the three screws in the PCI riser cage.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 108 109

Žádné komentáře

Hp ProLiant DL160 Gen8 Server Uživatelský manuál Strana 21