Hp ProLiant DL365 G5 Server Uživatelský manuál Strana 12
- Strana / 118
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Component identification 12
System maintenance switch
Position Default Function
S1 Off Off = iLO 2 security is enabled.
On = iLO 2 security is disabled.
S2 Off Off = System configuration can be modified.
On = System configuration is locked and cannot be modified.
S3 Off Reserved
S4 Off Reserved
S5 Off Off = Power-on password is enabled.
On = Power-on password is disabled.
S6 Off Off = Normal
On = ROM treats system configuration as invalid.
S7 Off Reserved
S8 Off Reserved
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase
all system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
NMI jumper
The NMI jumper allows administrators to perform a memory dump before performing a hard reset. Crash
dump analysis is an essential part of eliminating reliability problems, such as hangs or crashes in OSs,
device drivers, and applications. Many crashes can freeze a system, requiring you to do a hard reset.
Resetting the system erases any information that would support root cause analysis.
Systems running Microsoft® Windows® experience a blue-screen trap when the OS crashes. When this
happens, Microsoft® recommends that system administrators perform an NMI event by temporarily
shorting the NMI header with a jumper. The NMI event enables a hung system to become responsive
again.
HP Systems Insight Display and LEDs
The display provides status for all internal LEDs and enables diagnosis with the access panel installed.
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- Front panel LEDs and buttons 8
- Rear panel components 9
- Rear panel LEDs and buttons 10
- System board components 11
- System maintenance switch 12
- NMI jumper 12
- LED combinations 13
- SAS and SATA device numbers 14
- SAS and SATA hard drive LEDs 15
- Online/activity 16
- LED (green) 16
- Fault/UID LED 16
- (amber/blue) 16
- Interpretation 16
- Fan locations 17
- Operations 18
- Remove the access panel 20
- Install the access panel 20
- Operations 22 22
- Rack planning resources 24
- Optimum environment 25
- Power requirements 26
- Rack warnings 27
- Installing hardware options 28
- Item Description 29
- Setup 30 30
- Registering the server 31
- Introduction 32
- Processor option 32
- Memory options 37
- Memory configurations 38
- Advanced ECC memory 38
- Installing DIMMs 38
- Removing hard drive blanks 39
- Multibay device options 42
- Expansion board options 46
- Cabling 62
- Cabling 63 63
- Battery pack cabling 64
- Multibay backplane cabling 65
- Configuration and utilities 66
- HP ROM-Based Setup Utility 67
- Auto-configuration process 68
- Boot options 68
- BIOS Serial Console 68
- Array Configuration Utility 69
- Management tools 70
- Erase Utility 71
- Management Agents 71
- HP Systems Insight Manager 72
- Redundant ROM support 72
- USB support 73
- Diagnostic tools 74
- Web-Based Enterprise Service 75
- Open Services Event Manager 75
- Keeping the system current 76
- Care Pack 77
- Troubleshooting 78
- Symbols on equipment 79
- Warnings and cautions 79
- Symptom information 80
- Loose connections 81
- Service notifications 82
- Troubleshooting flowcharts 82
- General diagnosis flowchart 83
- Symptoms: 85
- Troubleshooting 87 87
- POST problems flowchart 88
- OS boot problems flowchart 89
- • Redundancy failure 92
- Troubleshooting 93 93
- Battery replacement 94
- FCC rating label 95
- Class A equipment 95
- Class B equipment 95
- Modifications 96
- • EMC Directive 2004/108/EC 97
- BSMI notice 98
- Japanese notice 98
- Korean notice 99
- Laser compliance 99
- Battery replacement notice 99
- Electrostatic discharge 101
- Specifications 102
- Specification Value 103
- Technical support 104
- Technical support 105 105
- Customer Self Repair 106
- Reparo feito pelo cliente 108
- Technical support 109 109
- Technical support 110 110
- Technical support 111 111
- Acronyms and abbreviations 112
- Index 116 116
- Index 117 117
- Index 118 118
Související produkty a manuály pro Počítačový hardware Hp ProLiant DL365 G5 Server
(74 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce