Hp ProLiant DL365 G5 Server Uživatelský manuál stáhnout pdf (Strana 8)

Component identification 8

Front panel LEDs and buttons

Item Description Status

1 Power On/Standby button

and system power LED

Green = System is on.

Amber = System is shut down, but power is still applied.

Off = Power cord is not attached, power supply failure has

occurred, no power supplies are installed, facility power is not

available, or disconnected power button cable.

2 UID button/LED Blue = Identification is activated.

Flashing blue = System is being remotely managed.

Off = Identification is deactivated.

3 Internal health LED Green = System health is normal.

Amber = System health is degraded. To identify the component in

a degraded state, refer to "HP Systems Insight Display and LEDs".

Red = System health is critical. To identify the component in a

critical state, refer to "HP Systems Insight Display and LEDs".

Off = System health is normal (when in standby mode).

4 External health LED

(power supply)

Green = Power supply health is normal.

Amber = Power redundancy failure occurred.

Off = Power supply health is normal when in standby mode.

5 NIC 1 link/activity LED Green = Network link exists.

Flashing green = Network link and activity exist.

Off = No link to network exists.

If power is off, the front panel LED is not active. View the LEDs on

the RJ-45 connector for status by referring to the rear panel LEDs

("Rear panel LEDs and buttons" on page 10).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 117 118

Žádné komentáře

Hp ProLiant DL365 G5 Server Uživatelský manuál Strana 8