Hp ProLiant DL380 G7 Server Uživatelský manuál stáhnout pdf (Strana 13)

Component identification 13

Secondary

(slot - form factor)

Primary

(slot - form factor)

PCIe2 riser

slot description

PCIe2 x16 riser

slot description

PCIe2/PCI-X riser

slot description

4 - FL/FH

1 - FL/FH

PCIe2 x16 (8,4,1)

PCIe2 x16

(16,8,4,1)

PCI-X 64 bit/133 MHz

5 - LP

2 - HL/FH PCIe2 x8 (4,1) — PCIe2 x16 (8,4,1)

6 - LP

3 - HL/FH PCIe2 x8 (4,1) — PCIe2 x8 (4,1)

Notes:

• "Primary" denotes the risers are installed in the primary riser connector.

• "Secondary" denotes the risers are installed in the secondary riser connector.

• Installing the risers listed in the table above in either the primary or secondary riser connectors

determines the form factor of the PCI cards supported by those risers.

• FL/FH denotes full-length, full-height. HL/FH denotes half-length, full-height. LP denotes low profile.

• The PCIe2 x16 riser supports a maximum power of 150 W with an HP power cable. This cable must be

used for PCIe card wattages greater than 75 W.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 126 127

Žádné komentáře

Hp ProLiant DL380 G7 Server Uživatelský manuál Strana 13