Hp ProLiant DL380p Gen8 Server Uživatelský manuál Strana 93

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 134
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 92
Cabling 93
12 drive LFF or 25 drive SFF
PCIe option
Depending on the server configuration, you may need to remove the primary PCI riser cage ("Remove
the PCI riser cage" on page 29) before cabling to a PCIe expansion board.
Chipset SATA cable option
With the chipset SATA cable option, the chipset SATA controller can be used with a single SATA hard drive
that is installed in one hard drive bay of the SFF or LFF hard drive cage.
When using the chipset SATA configuration, the following conditions apply:
o Only drive bay 5 is enabled. The remaining drive bays are disabled.
o The optical bay is disabled because the chipset SATA controller port on the system board is
redirected from the optical bay to the drive cage.
Zobrazit stránku 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 133 134

Komentáře k této Příručce

Žádné komentáře