Hp ProLiant ML10 Server Uživatelský manuál stáhnout pdf (Strana 32)

Hardware options installation 32

Connect the fan cable to the system board.

23. Install the front bezel (on page 14).

24. Install the access panel (on page 14).

25. Return the server to an upright position.

26. Connect the power cord to the server.

27. Connect the power cord to the power source.

28. Press the Power On/Standby button.

The server exits standby mode and applies full power to the system. The system power LED changes

from amber to green.

Optical drive option

1. Press the Power On/Standby button.

The server powers down and enters standby mode. The system power LED changes from green to

amber. Power is still applied to the server.

2. Disconnect the power cord from the power source.

3. Disconnect the power cord from the server.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 75 76

Žádné komentáře

Hp ProLiant ML10 Server Uživatelský manuál Strana 32