Hp ProLiant ML110 G7 Server Uživatelský manuál

HP ProLiant ML110 G7 Server User Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and storage sys

Component identification 10 System board components Item Description 1 Dedicated iLO management module connector 2 System maintenance switch 3 RP

Support and other resources 100 providers or service partners) identifies that the repair can be accomplished by the use of a CSR part, HP will ship

Support and other resources 101 Pour plus d'informations sur le programme CSR de HP, contactez votre Mainteneur Agrée local. Pour plus d'i

Support and other resources 102 HINWEIS: Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des Kunden zu erfüllen

Support and other resources 103 sustituciones que lleve a cabo el cliente, HP se hará cargo de todos los gastos de envío y devolución de componentes

Support and other resources 104 Opcional – Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo feito pe

Support and other resources 105

Support and other resources 106

Acronyms and abbreviations 107 Acronyms and abbreviations ABEND abnormal end ACU Array Configuration Utility AMP Advanced Memory Protection ASR A

Acronyms and abbreviations 108 IML Integrated Management Log ISEE Instant Support Enterprise Edition LFF large form factor NMI nonmaskable interr

Acronyms and abbreviations 109 SAS serial attached SCSI SATA serial ATA SD Secure Digital SFF small form factor SIM Systems Insight Manager TMR

Component identification 11 Item Description 27 Rear USB connectors (4) 28 NMI header DIMM slot locations DIMM slots are numbered sequentially (1

Documentation feedback 110 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documenta

Index 111 A access panel 21 air baffle 22 Array Configuration Utility (ACU) 68 ASR (Automatic Server Recovery) 70 authorized reseller 99 a

Index 112 front panel LEDs 7 G general diagnosis flowchart 82 grounding methods 96 grounding requirements 25 guidelines 30 H hardware conf

Index 113 rear panel LEDs 9 redundant power supply cabling 65 Re-entering the server serial number 69 registering the server 29 regulatory c

Component identification 12 CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to properly configure the server or dat

Component identification 13 SAS and SATA drive numbering • Four-bay LFF drive model • Eight-bay SFF drive model

Component identification 14 SAS and SATA drive LEDs Item Description 1 Fault/UID LED (amber/blue) 2 Online LED (green) SAS and SATA drive

Component identification 15 Online/activity LED (green) Fault/UID LED (amber/blue) Interpretation Off Steadily amber A critical fault condition has

Component identification 16 LED3 pattern LED4 pattern Interpretation — One blink every two seconds The system is powered down, and the cache

Component identification 17 FBWC module LEDs The FBWC module has two single-color LEDs (green and amber). The LEDs are duplicated on the reverse sid

Component identification 18 Fan locations Item Description 1 Rear system fan (for processor cooling) 2 Processor-heatsink fan assembly 3 Fron

Operations 19 Operations Power up the server 1. Connect each power cord to the server. 2. Connect each power cord to the power source. 3. Press t

© Copyright 2011, 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warr

Operations 20 Unlock and open the tower bezel The tower bezel must be unlocked and opened to access the drive cage and media bays. It must be unlock

Operations 21 2. Close and lock the tower bezel. Remove the access panel WARNING: To reduce the risk of personal injury from hot surfaces, all

Operations 22 4. Connect each power cord to the server. 5. Connect each power cord to the power source. IMPORTANT: Be sure that the panel is lo

Operations 23 1. Insert the tabs on the baffle into the slots on the rear chassis. 2. Push the front end of the baffle inside the chassis. 3. Ins

Setup 24 Setup Optional installation services Delivered by experienced, certified engineers, HP Care Pack services help you keep your servers up and

Setup 25 Temperature requirements To ensure continued, safe, and reliable equipment operation, install or position the system in a well-ventilated,

Setup 26 Identifying the contents of the server shipping carton Unpack the server shipping carton and locate the materials and documentation necessa

Setup 27 CAUTION: To avoid damage to the equipment, be sure that the rack rails are installed in a predetermined location on the rack so that airf

Setup 28 CAUTION: To prevent damage to equipment, do not place the monitor on a rack-mounted server. The rack enabling kit supports only the serve

Setup 29 • Press the F9 key when prompted during the boot process to change the server settings using RBSU. The system is set up by default for the

Contents 3 Contents Component identification ...

Hardware options installation 30 Hardware options installation Introduction If more than one option is being installed, read the installation instru

Hardware options installation 31 IMPORTANT: Hot-plug capability and drive LED support are only available when a supported optional controller is i

Hardware options installation 32 4. Prepare the drive. 5. Install the drive. 6. Install the tower bezel (on page 20). 7. Power up the server (o

Hardware options installation 33 b. Disconnect each power cord from the server. 3. Unlock the tower bezel ("Unlock and open the tower bezel&qu

Hardware options installation 34 For cable routing information, see "Hot-plug, SATA drive support (on page 61)." — Connect one end of th

Hardware options installation 35 10. Slide the drive cage assembly fully into the server chassis and install the four screws. 11. Install the driv

Hardware options installation 36 7. Using a T-15 Torx screwdriver, remove the four screws, and then remove the drive cage assembly. 8. Slide the S

Hardware options installation 37 10. Slide the drive cage assembly fully into the server chassis and install the four screws. 11. Install the driv

Hardware options installation 38 9. Connect each power cord to the server. 10. Connect each power cord to the power source. 11. Power up the serve

Hardware options installation 39 CAUTION: After the server is powered down, wait 15 seconds and then check the amber LED before unplugging the cab

Contents 4 Drive installation guidelines ...

Hardware options installation 40 9. Remove the full-length expansion board retainer if any full-length expansion boards are installed. 10. Install

Hardware options installation 41 12. Connect the battery/capacitor pack cable to the cache module. 13. Connect the battery/capacitor pack cable to

Hardware options installation 42 14. Install the battery/capacitor pack. 15. Install the full-length expansion board retainer, if any full-length

Hardware options installation 43 5. Remove the optical bay blank. 6. Remove the EMI shield. Retain the shield for future use.

Hardware options installation 44 7. Install the optical drive into the lower optical drive bay. When fully inserted, the assembly locking latch clic

Hardware options installation 45 Memory options The server memory subsystem supports only UDIMMs. The server supports dual-rank, PC3-10600E (DDR3) D

Hardware options installation 46 For the latest supported memory information, see the QuickSpecs on the HP website (http://h18000.www1.hp.com/produc

Hardware options installation 47 UDIMM maximum memory configurations The server supports a maximum of 16 GB, using 1-GB, 2-GB, and 4-GB single- or d

Hardware options installation 48 6. Install the DIMM. 7. Install the access panel (on page 21). 8. Lock the tower bezel. 9. Connect each power c

Hardware options installation 49 7. Remove the full-length expansion board retainer if any full-length expansion boards are installed. 8. Remove t

Contents 5 HP Insight Remote Support software ... 72 K

Hardware options installation 50 9. Install the expansion board. 10. Connect any required internal or external cables to the expansion board. See

Hardware options installation 51 5. Using a flat screwdriver, toggle the knockout to loosen it, and then pull it out of the chassis. 6. Install th

Hardware options installation 52 2. Select the Network menu. 3. Click the Network Interface Adapter field. 4. To change the setting to ON, press t

Hardware options installation 53 Installing the Trusted Platform Module board WARNING: To reduce the risk of personal injury, electric shock, or

Hardware options installation 54 6. Install the TPM board. Press down on the connector to seat the board. 7. Install the TPM security rivet by pre

Hardware options installation 55 To help ensure maximum security, observe the following guidelines when retaining the recovery key/password: • Alwa

Hardware options installation 56 6. Remove the power supply. 7. Disconnect all cables from installed optical drives. 8. Remove all installed devi

Hardware options installation 57 o Remove the EMI shield. 9. Install the RPS cage. 10. Insert the RPS backplane module cables into the optical d

Hardware options installation 58 11. Do one of the following: o For improved power efficiency, install an HP CS power supply in the upper bay o

Hardware options installation 59 o For improved power efficiency and redundancy, install two HP CS power supplies: 12. Remove the four screws, and

Contents 6

Cabling 60 Cabling Storage cabling Four-bay LFF drive cabling Non-hot-plug, SATA drive support Item Description 1 Power cable 2 Non-hot-plug LFF

Cabling 61 Hot-plug, SATA drive support Item Description 1 Power cable 2 I2C cable 3 Data cable (Mini-SAS cable to system board Mini-SAS connecto

Cabling 62 Eight-bay SFF drive cabling This configuration supports only hot-plug SAS drives. Item Description 1 Power cable 2 I2C cable 3 Mini-

Cabling 63 Optical drive cabling Optical drive cabling in a nonredundant power configuration Item Description 1 Upper optical drive power cable 2

Cabling 64 Item Description 1 Upper media drive power cable 2 Upper media drive SATA cable Battery/capacitor pack cabling Power supply cabling

Cabling 65 Item Description 2 4-pin power cable Redundant power supply cabling Item Description 1 24-pin power cable 2 16-pin RPS cable 3 3-pi

Configuration and utilities 66 Configuration and utilities Configuration tools SmartStart software SmartStart is a collection of software that optim

Configuration and utilities 67 • Displaying system information • Selecting the primary boot controller • Configuring memory options • Language s

Configuration and utilities 68 For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the Documentation CD or the HP website

Configuration and utilities 69 configure arrays, see the Configuring Arrays on HP Smart Array Controllers Reference Guide on the HP website (http://

Component identification 7 Component identification Front panel components Item Description 1 Media drive bay 2 USB connectors (4) Front panel

Configuration and utilities 70 Management tools Automatic Server Recovery ASR is a feature that causes the system to restart when a catastrophic ope

Configuration and utilities 71 For more information about iLO features (which may require an iLO Advanced Pack or iLO Advanced for BladeSystem licen

Configuration and utilities 72 HP Insight Diagnostics survey functionality HP Insight Diagnostics (on page 71) provides survey functionality that ga

Configuration and utilities 73 • HP Insight Remote Support Advanced: This software provides comprehensive remote monitoring and proactive service s

Configuration and utilities 74 For more information about version control tools, see the HP Systems Insight Manager Help Guide and the Version Contr

Configuration and utilities 75 • Downloads the latest components from Web • Enables direct update of BMC firmware (iLO and LO100i) For more inform

Troubleshooting 76 Troubleshooting Troubleshooting resources The HP ProLiant Servers Troubleshooting Guide provides procedures for resolving common

Troubleshooting 77 Symbols on equipment The following symbols may be placed on equipment to indicate the presence of potentially hazardous condition

Troubleshooting 78 WARNING: To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding plug. The

Troubleshooting 79 2. Record any error messages displayed by the system. 3. Remove all diskettes, CD-ROMs, DVD-ROMs, and USB drive keys. 4. Power

Component identification 8 Item Description Status 1 System health LED Green = Normal Amber = System degraded Red = System critical 2 NIC 1 li

Troubleshooting 80 When requested to break the server down to the minimum configuration, uninstall the following components, if installed: • All ad

Troubleshooting 81 Service notifications To view the latest service notifications, refer to the HP website (http://www.hp.com/go/bizsupport). Select

Troubleshooting 82 General diagnosis flowchart The General diagnosis flowchart provides a generic approach to troubleshooting. If you are unsure o

Troubleshooting 83 Item See 5 "General memory problems are occurring" in the HP ProLiant Servers Troubleshooting Guide located on the Doc

Troubleshooting 84 Server power-on problems flowchart Symptoms: • The server does not power on. • The system power LED is off or amber.

Troubleshooting 85 • The external health LED is red or amber. • The internal health LED is red or amber. NOTE: For the location of server LED

Troubleshooting 86

Troubleshooting 87 POST problems flowchart Symptoms: • Server does not complete POST NOTE: The server has completed POST when the system att

Troubleshooting 88 Item See 13 • "Server information you need" in the HP ProLiant Servers Troubleshooting Guide located on the Documenta

Troubleshooting 89 OS boot problems flowchart Symptoms: • Server does not boot a previously installed operating system • Server does not boot Smar

Component identification 9 4 Slot 1 PCIe2x16 (16, 8, 4, 1) 5 Slot 2 PCIe2x8 (4, 1) 6 Slot 3 PCIe2x8 (4, 1) 7 Slot 4 PCIe2x4 (1) 8 USB connectors (4)

Troubleshooting 90 Server fault indications flowchart Symptoms: • Server boots, but a fault event is reported by Insight Management Agents • Ser

Troubleshooting 91 Possible causes: • Improperly seated or faulty internal or external component • Unsupported component installed • Redundancy f

Troubleshooting 92 POST error messages and beep codes For a complete listing of error messages, refer to the "POST error messages" in th

Troubleshooting 93 WARNING: To avoid potential problems, ALWAYS read the warnings and cautionary information in the server documentation before re

Battery replacement 94 Battery replacement If the server no longer automatically displays the correct date and time, you might have to replace the b

Regulatory information 95 Regulatory information Safety and regulatory compliance For safety, environmental, and regulatory information, see Safety

Electrostatic discharge 96 Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions yo

Specifications 97 Specifications Environmental specifications Specification Value Temperature range* Operating 10°C to 35°C (50°F to 95°F) Ship

Specifications 98 Rated input frequency 50 Hz to 60 Hz Rated input current 5.5 A at 100 VAC 2.6 A at 200 VAC Rated input power 526 W at 100V AC inpu

Support and other resources 99 Support and other resources Before you contact HP Be sure to have the following information available before you call