Hp ProLiant ML350e Gen8 v2-Server Uživatelský manuál stáhnout pdf (Strana 77)

Hardware options installation 77

Remove the access panel (on page 25).

6. If installed, remove the PCI air baffle (on page 27).

7. Remove the system air baffle (on page 28).

8. Remove any installed full-length PCI expansion cards ("Remove the full-length expansion board" on

page 29).

9. Remove the fan modules and the fan blank (on page 30).

10. Install the Smart Array controller ("Installing an expansion board" on page 63).

11. Connect the common end of the Mini-SAS Y-cable to the controller option.

o For 4+4 LFF configuration, use the right-angle connector cable

o For 8 SFF configuration, use the straight connector cable

12. Route the two ends of the Mini-SAS Y-cable through the cable management clips, and then connect them

to the drive backplane.

o Four-bay + four-bay LFF cable routing to boxes 1 and 2

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 128 129

Žádné komentáře

Hp ProLiant ML350e Gen8 v2-Server Uživatelský manuál Strana 77