Hp 500B Uživatelský manuál Strana 39

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 113
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 38
Replacing a Hard Drive
1. Follow the steps in Removing a Hard Drive on page 28 to remove the hard drive.
2. Slide the replacement hard disk drive into the bay.
NOTE: If you are replacing an old drive with a new drive, use the four retainer screws from the
old drive to install the new drive.
Figure 2-39 Installing the hard drive
3. Align the screw holes on the side of the hard drive with the holes marked “HDD” on the bay.
Figure 2-40 Align the screw holes
CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A
sharp bend can break the internal wires.
Drives
31
Zobrazit stránku 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 112 113

Komentáře k této Příručce

Žádné komentáře