Hp A7818-IE002 Uživatelský manuál Strana 103

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 196
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 102
Hardware Components
PCI Cards
Chapter 5
103
For information about how to connect internal and external SCSI devices, please read
Chapter 6 “Installing and Replacing Hardware Parts.
SCSI Cable Information
You should use your external SCSI connector to connect LVD SCSI devices to your
workstation. This section provides you with SCSI cable information that is important for
the correct operation of your external SCSI device.
NOTE The total length of the external SCSI cable shouldn’t exceed 10 meters (approximately
32.81 feet) and at least eight inches of cable must separate each device.
Contact your dealer to order shielded HP SCSI cables to connect external SCSI
accessories.
CAUTION LVD SCSI is very sensitive to noise; therefore, all cables on the SCSI bus must be
exceptionally high-quality cables. The following table shows examples of such cables.
Please make sure that any external hard disk enclosures are rated for LVD SCSI use.
Additional SCSI Card Features.
The following table describes features of the Adaptec SCSI card.
Table 5-3
Cable Number Cable Length Description
C2978A 0.5m
68-pin HDTS
a
to 68-pin HDTS
a. High Density Thumbscrew (HDTS)
C2979A 1.5m
C2911B 1.0m
C2924B 2.5m
C2361A 1.0m
68-pin VHDCI
b
to 68-pin HDTS
b. Very High Density Cabled Interconnect (VHDCI)
C2362A 2.5m
C2363A 10.0m
C2365A 5.0m
Zobrazit stránku 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 195 196

Komentáře k této Příručce

Žádné komentáře