Hp BL460C G6 Uživatelský manuál stáhnout pdf (Strana 22)

Hardware options installation 22

2. Prepare the hard drive.

3. Install the hard drive.

4. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("SAS and

SATA hard drive LED combinations" on page 8).

Processor option

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: To prevent possible server blade malfunction and damage to the equipment,

multiprocessor configurations must contain processors with the same part number.

CAUTION: To prevent possible server blade overheating, always populate processor socket 2

with a processor and a heatsink or a processor socket cover and a heatsink blank.

CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the

heatsink is removed from the processor after it has been installed.

IMPORTANT: When installing the heatsink, align the guide pins on the processor retention

bracket with the alignment holes in the heatsink.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 106 107

Žádné komentáře

Hp BL460C G6 Uživatelský manuál Strana 22