Hp Slate 21-s100 All-in-One Uživatelský manuál stáhnout pdf (Strana 12)

4. Align the screw holes on the mounting fixture with the VESA holes on the back of the all-in-one,

and then insert four 10 mm screws (not provided) through the holes on the mounting fixture and

into the mounting holes on the all-in-one.

CAUTION: This all-in-one supports the VESA industry standard 100 mm mounting holes. To

attach a third-party mounting solution to the all-in-one, four 4 mm, 0.7 pitch, and 10 mm long

screws are required. Longer screws must not be used because they may damage the all-in-one.

It is important to verify that the manufacturer’s mounting solution is compliant with the VESA

standard and is rated to support the weight of the all-in-one. For best performance, it is important

to use the power and video cables provided with the all-in-one.

6 Chapter 2 Setting up the hardware

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Žádné komentáře

Hp Slate 21-s100 All-in-One Uživatelský manuál Strana 12