HP J7949E Uživatelský manuál stáhnout pdf (Strana 117)

ENWW Using the Embedded Web Server 117

Authorization

The Authorization page provides tabs that allow you to control

access to the device, as well as to device configuration and

management features. In addition, you may configure certificates

for client and server authentication.

Admin. Account

Use this page to set an administrator password for controlled access

to Jetdirect configuration and status information. The

administrator password is shared by Jetdirect configuration tools,

such as the embedded Web server, Telnet, and HP Web Jetadmin.

In addition, for applicable printers, the password is shared with the

printer (see Printer Password Synchronization

below).

If a password is set and you attempt to access Jetdirect print server

settings, you will be prompted for a user name and this password

before you are allowed access.

Note The administrator password may be cleared by a

cold reset of the print server, which resets the print

server to factory default settings.

A checkbox allows you to synchronize HP Web Jetadmin and the

SNMP v1/v2c Set Community Name.If you enable this feature (the

checkbox is checked), the administrator password will also be used

as the SNMP Set Community Name for SNMP v1/v2c management

applications.

Note If you subsequently change the SNMP Set

Community Name (for example, using the SNMP

tab on the Network Settings page or from Web

Jetadmin), the two settings will no longer be

synchronized.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 231 232

Žádné komentáře

HP J7949E Uživatelský manuál Strana 117