HP J7949E Uživatelský manuál stáhnout pdf (Strana 88)

ENWW TCP/IP Configuration 88

Using Telnet to Erase the Existing IP Settings

To erase the IP address during a Telnet session, use the following

command line entries:

1. Type cold-reset, then press Enter.

2. Type quit, then press Enter to exit Telnet.

3. Power the print server off/on.

Note This procedure resets all TCP/IP parameters, but

only affects the TCP/IP subsystem. Parameters for

other subsystems such as IPX/SPX or AppleTalk are

not affected.

To reset all parameters to factory default values,

refer to Chapter 8

Using the Embedded Web Server

You can set IP parameters on HP Jetdirect print servers that

support the embedded Web server. For more information, refer to

Chapter 4

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 231 232

Žádné komentáře

HP J7949E Uživatelský manuál Strana 88