Hp E1367A Uživatelský manuál stáhnout pdf (Strana 41)

ARM

The ARM subsystem selects the number of scanning cycles (1 through

32767) for each

INITiate command.

Subsystem Syntax ARM

:COUNt <

number> MIN | MAX

:COUNt? [MIN | MAX]

:COUNt ARM:COUNt <number> MIN | MAX allows scanning cycles to occur a

multiple of times (1 to 32767) with one

INITiate command when

INITiate:CONTinuous OFF |0 is set. MIN sets 1 cycle and MAX sets 32767

cycles.

Parameters

Parameter Name Parameter Type Range of Values

numeric 1 |32767 |MIN |MAX

Comments • Number of Scans: Use only values between 1 to 32767 for the

number of scanning cycles.

• Related Commands: ABORt, INITiate:IMMediate

• *RST Condition: ARM:COUNt 1

Example Setting Ten Scanning Cycles

This example sets an RF multiplexer for 10 scans of channels 00 through

03. When the scan sequence completes, channel 03 is closed.

ARM:COUN 10 ! Set 10 scans per INIT command

SCAN (@100:103) ! Scan channels 00-03

INIT ! Start scan, close channel 00

Chapter 5 HP E1366A/E1367A RF Multiplexers Command Reference 41

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 73 74

Žádné komentáře

Hp E1367A Uživatelský manuál Strana 41