HP ProDesk 600 G3 Base Model Small Form Factor PC Uživatelský manuál stáhnout pdf (Strana 37)

Expansion card

Description

NVIDIA GT730 2 GB DDR3 PCIex8 graphics card

NVIDIA GT730 1 GB DDR3 PCIex8 graphics card

Intel PRO/1000 NIC

Parallel (printer) port

USB 3.1 Type Cx1 PCIe x1 card

The computer has one PCI Express x4 expansion socket and one PCI Express x16 expansion socket.

NOTE: The PCI Express sockets support only low prole cards.

You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 socket.

For dual graphics card congurations, the rst (primary) card must be installed in the PCI Express x16 socket.

To remove, replace, or add an expansion card:

1. Prepare the computer for disassembly (Preparation for disassembly on page 20).

2. Remove the access panel (Access panel on page 21).

3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot

on the back of the computer chassis.

4. Rotate the slot cover release latch to the open position.

5. Before installing an expansion card, remove the expansion slot cover or the existing expansion card.

NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to

the expansion card.

Expansion card 29

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 149 150

Žádné komentáře

HP ProDesk 600 G3 Base Model Small Form Factor PC Uživatelský manuál Strana 37