HP S10 Uživatelský manuál stáhnout pdf (Strana 41)

Procedure 6: Connect FC-AL Devices 39

Installation

If the hub is to be connected to an FC-AL adapter that is connected to another FC-AL

device, follow the removal procedures in the document that came with the FC-AL

device before disconnecting the device’s cable.

If the hub is to be connected to an FC-AL device that is connected directly to a server,

follow the removal procedures in the document that came with the FC-AL device

before disconnecting the device’s cable.

When installing model L10 long-wave hubs in a cascaded topology, make sure the

long-wave port is connected only to the long-wave port on another long-wave hub.

3. For the model L10 long-wave hub, connect the long-wave loopback cable to the

long-wave port if the port is not in use.

4. Install any special files the FC-AL devices need. Refer to the device manual for details.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 133 134

Žádné komentáře

HP S10 Uživatelský manuál Strana 41