HP NetServer LH 3000 Instalační příručka stáhnout pdf (Strana 20)

Chapter 2 Rack Cabling References

Power Cabling References and Guidelines

Power Considerations for the HP NetServer LH 3000r

The HP NetServer LH 3000r can be configured in a wide range of voltages from

100 - 240 VAC. Power supply (UPS) and distribution (PDU) components are

available to support these configurations. A Redundant Switch is also available.

Details of power considerations for the HP NetServer LH 3000r include:

◊ the appropriate power cord(s) for each server is (are) shipped according

to voltage requirements; refer to Table 2-2 for details

◊ each power supply installed in the HP NetServer LH 3000r uses a

separate jumper cord

◊ available in 100/120, 200/208, and 220/230/240 VAC configurations

for the U. S. market

◊ available in either 200/208 VAC or 220/230/240 VAC configurations

for international markets

◊ Uninterruptible Power Supply (UPS) models rated at 3000 Volt Amps

(2250 Watts) are available for each voltage range; and a 2200 Volt

Amp (1600 Watts) UPS is available for 110/120 and 220/230/240 VAC

(see Table 2-1)

◊ at 100/120 VAC, a wide range Power Distribution Unit (PDU) rated at

16 A is available (9 outlets)

◊ for both 200/208 and 220/230/240 voltages, a wide range Power

Distribution Unit (PDU) model rated at 16 Amps is available; a

10-Amp-rated extension PDU is also available (see Figure 2-1)

◊ one or more PDUs can be used in each rack enclosure, depending upon

requirements for power, current, and number of receptacles (see Table

2-4.)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 66 67

Žádné komentáře

HP NetServer LH 3000 Instalační příručka Strana 20