HP NetServer LP 2000r Uživatelská příručka stáhnout pdf (Strana 84)

Chapter 9 Connecting the Monitor, Keyboard, Mouse, and UPS

Installing a Power Supply Module

The HP Netserver LP 2000r comes with one power supply module. A second

power supply module for redundancy is optional. If only one power supply

module is used, it must be installed in power supply bay 2, and a power supply

filler panel must be installed in the empty bay 1. Each power supply has its own

power cord (see Figure 9-2).

CAUTION Operating the HP Netserver without a power supply filler

panel in an empty power supply bay could cause excessive

EMI or thermal damage to the Netserver.

Power Supply Bay #1

Power Supply Bay #2

AC for Power Supply Bay #1

AC for Power Supply Bay #2

Figure 9-2. Power Supply Connectors

1. Remove the power supply filler panel from the empty power supply bay:

a. Pinch the release lever on the filler panel and pull the lever down.

b. Slide the filler panel out of the power bay. See Figure 9-3.

Save the power supply filler panel for future use. The filler panel must

be used in the empty power supply bay whenever you operate the HP

Netserver with a single power supply module.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 135 136

Žádné komentáře

HP NetServer LP 2000r Uživatelská příručka Strana 84