HP N911a Rychlý návod stáhnout pdf (Strana 11)

English

Set up and use fax

Connecting to a DSL/ADSL line

If you subscribe to a DSL/ADSL service, follow these steps to connect the fax.

1. Connect the DSL/ADSL lter and telephone cord provided

by your DSL/ADSL service provider between the telephone

wall jack and the DSL/ADSL lter.

2. Connect the telephone cord provided with the printer

between the DSL/ADSL lter and the 1-Line port on the

printer.

1 Telephone wall jack

2 DSL/ADSL lter and telephone cord (provided by your DSL/ADSL service

provider)

3 Telephone cord provided in the box with the printer, connected to the

1-LINE port on the printer

Connecting additional equipment

Remove the white plug from the port labeled 2-EXT on the back of the printer, and then connect a phone

to this port.

If you are connecting additional equipment, such as a dial-up computer modem or a telephone, you will

need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two RJ-11

ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which

has two RJ-11 ports on the front and a plug on the back.

Note: If you subscribe to a DSL/ADSL service, connect to the DSL/ADSL lter to the parallel splitter,

and then use the HP-provided telephone cord to connect the other end of the lter to the 1-Line port

on the printer. Remove the white plug from the port labeled 2-EXT on the back of the printer, and

then connect a telephone set or telephone answering machine to the 2-EXT port. Next, connect the

second port of the parallel splitter to the DSL/ADSL modem which is connecting to the computer.

1 Telephone wall jack

2 Parallel Splitter

3 DSL/ADSL lter (available from your DSL/ADSL service provider)

4 Phone cord provided with printer

5 DSL/ADSL Modem

6 Computer

7 Telephone

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 107 108

Žádné komentáře

HP N911a Rychlý návod Strana 11