HP PCL 5 Uživatelský manuál Strana 269

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 286
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 268
EN Modifying Output Color (Color LaserJet, 5, 5M, DeskJet) D-17
Gamma Correction
Color monitors, which are by nature non-linear, appear incorrect when
given a linear ramp of some color. Gamma correction can significantly
improve perceptual correctness by adjusting the brightness or
darkness of the color data sent from the monitor to any other
non-linear device.
Gamma Correction Command
?*t#I
* The practical range for gamma values is 0.0 to 4.0.
Assuming 8 bits per primary (256 intensity levels per primary), the
corrected intensity for each color primary is calculated as follows:
Gamma correction is referred to in terms of device- dependent RGB.
This command does not destroy the contents of device-dependent
color lookup tables, but setting a gamma value supersedes any
lookup table input in either Device CMY or Device RGB.
Note The default value (0) gives the same result as a gamma value of 1.0,
which results in a unity gamma curve.
# = Gamma number
Default = 0 (gamma correction off)
Range = 0.0 to 32767.0 (command is ignored for invalid values)*
Intensity = 255 *
Input
255
--------------



1
y
---
Zobrazit stránku 268
1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 285 286

Komentáře k této Příručce

Žádné komentáře