
110 C
HAPTER
7: S
ETTING A
P
OLICY
Selecting Remote
Management
When remote management is selected, a Management SA is
automatically generated. The Management SA uses Manual Keying to set
up a VPN tunnel between the Firewall and the VPN client. The
Management SA also defines Inbound and Outbound Security Parameter
Indices (SPIs) which match the last eight digits of the Firewall’sserial
number. The preset SPIs are displayed in the Security Association
Information section.
1 Enter a 16 character hexadecimal encryption key in the Encryption Key
field or use the randomly generated key that appears in the Encryption
Key field. Valid hexadecimal characters are 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E
and F. An example of a valid encryption key is:
1234567890ABCDEF
2 Enter a 32 character hexadecimal authentication key in the
Authentication Key field or use the randomly generated key that appears
in the Authentication Key field. An example of a valid authentication key
is:
1234567890ABCDEF1234567890ABCDEF
.
3 Click the Update button and then restart the Firewall for the change to
take effect.
Using the Firewall
with the NBX 100
Business Telephone
System
3Com recommends that you place your NBX 100 Processor on the LAN
port of the Firewall. This is to ensure that your telephone system is
completely secure from hackers on the Internet. If you wish to use NBX
phones on the WAN or DMZ ports of the Firewall, then you must open a
specific port on the Firewall. Do this by following these simple steps:
1 Access the Web interface from a Web browser.
2 Click on the Policy button.
3 Click the Add Service tab.
4 Type in NBX for the Name of the service.
5 Select UDP for the protocol type and enter 2093 as the Port number.
6 Click Add.
7 Click on the Policy Rules tab.
8 Click Allow, and select NBX from the pull down menu.
9 Click WAN or DMZ for the Source and select LAN for the Destination.
10 Click Update and restart the Firewall.
DUA1611-0AAA02.book Page 110 Thursday, August 2, 2001 4:01 PM
Komentáře k této Příručce