HP Server rp8400 Instalační příručka Strana 70

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 94
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 69
Chapter 5
System Installation
Configuring LAN Information for the MP
70
Configuring LAN Information for the MP
This section describes how to set and verify the server Management Processor (MP) LAN port information.
LAN information includes the MP network name, the MP IP address, the subnet mask, and gateway address.
This information is provided by the customer.
To set the MP LAN IP address:
1. At the MP Main Menu prompt (MP>), enter cm. From the MP Command Menu prompt (MP:CM>), enter
lc (for LAN configuration).
The screen displays the default values and asks if you want to modify them. It is a good idea to write
down the information, as it may be required for future troubleshooting.
NOTE If the Command Menu is not shown, enter q to return to the MP Main Menu, then enter cm
Enter lc and press the Return key. The following screen appears:
Figure 5-7 The lc Command Screen
NOTE The value in the “IP address” field has been set at the factory. Obtain the LAN IP address
from the customer.
2. At the prompt, Do you want to modify the configuration for the customer LAN?, enter y.
The current IP address is shown; then the following prompt appears: Do you want to modify it? (Y/[N])
3. Enter y.
4. Enter the new IP address.
The customer shall provide this address for network interface 0.
MP:CM> LC
This command modifies the LAN parameters.
Current configuration of GSP customer LAN interface
MAC address : 00:30:6e:05:09:24
IP address : 15.99.83.215 (0x0f6353d7)
Hostname : quartz-s
Subnet mask : 255.255.255.0 (0xffffff00)
Gateway : 15.99.83.254 (0x0f6353fe)
Status : UP and RUNNING
AutoNegotiate : Enabled
Data Rate : 100 Mb/s
Duplex : Half
Error Count : 0
Last Error : none
Do you want to modify the configuration for the customer LAN? (Y/[N]) q
MP:CM>
Zobrazit stránku 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 93 94

Komentáře k této Příručce

Žádné komentáře