HP Server rp8400 Instalační příručka stáhnout pdf (Strana 71)

Chapter 5

System Installation

Configuring LAN Information for the MP

5. Confirm the new address.

6. Enter the MP Network Name.

This is the host name for the customer LAN. The name can be as many as 64 characters, and include

alpha numerics, - (dash), _ (under bar), . (period), or a space. It is recommended that the name be a

derivative of the complex name. For example, Acme.com_MP.

7. Enter the LAN parameters for Subnet mask and Gateway address.

This information shall come from the customer.

8. Once step 7 is completed, the system will indicate the parameters have been updated and return to the

MP Command Menu prompt (MP:CM>)

9. To check the LAN parameters and status, enter the ls command at the MP Command Menu prompt

(MP:CM>).

10. A screen similar to the following will appear allowing verification of the settings:

Figure 5-8 The ls Command Screen

To return to the MP main menu, enter ma.

To exit the MP, enter x at the MP main menu.

MP:CM> LS

Current configuration of GSP customer LAN interface

MAC address : 00:30:6e:05:09:24

IP address : 15.99.83.215 (0x0f6353d7)

Hostname : quartz-s

Subnet mask : 255.255.255.0 (0xffffff00)

Gateway : 15.99.83.254 (0x0f6353fe)

Status : UP and RUNNING

AutoNegotiate : Enabled

Data Rate : 100 Mb/s

Duplex : Half

Error Count : 0

Last Error : none

P:CM>

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 93 94

Žádné komentáře

HP Server rp8400 Instalační příručka Strana 71