HP Firewall Series Uživatelský manuál Strana 105

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 119
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 104
101
Configuration example 2
Network requirements
The FW device connects the internal network 4.1.1.0/24 through GigabitEthernet 0/4 and connects the
external network through GigabitEthernet 0/1. Configure the FW device to send logs to the syslog server
with IP address 192.168.96.15 in the external network.
Figure 108 Network diagram for configuring FW and Firewall Manager
Configuration procedures
Configuring the firewall device
1. Configure interfaces
Select Device Management > Interface, assign the IP address 192.168.250.214/24 to GigabitEthernet
0/1, and add the interface to zone Untrust. Assign the IP address 4.1.1.1/24 to GigabitEthernet 0/4, and
add the interface to zone Trust.
Figure 109 Configure interfaces
2. Configure NAT
Select Firewall > NAT Policy > Dynamic NAT, configure dynamic NAT on GigabitEthernet 0/1,
referencing ACL 3000 and configuring Easy IP as the address translation mode.
Figure 110 Configure dynamic NAT
Zobrazit stránku 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 118 119

Komentáře k této Příručce

Žádné komentáře