HP Firewall Series Uživatelský manuál stáhnout pdf (Strana 35)

System configuration

Configuring system parameter

Configure the system parameter to allow non-SNMP devices in the system.

Configuration guide

From the navigation tree of the system management component, select System Parameter under System

Config. The system parameter configuration page appears, as shown in

Figure 30. Select the check box

for the parameter and click Apply.

Figure 30 System parameter setting

Configuring management ports

This module allows you to specify the Firewall Manager background ports for receiving various logs from

devices.

Configuration guide

From the navigation tree of the system management component, select Management Ports under System

Config. The management ports configuration page appears, as shown in

Figure 31. Table 38 describes

the management port configuration items.

Figure 31 Management port configuration page

Table 38 Management port configuration items

Item Description

NAT Logs Port

Required

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 118 119

Žádné komentáře

HP Firewall Series Uživatelský manuál Strana 35