HP PROCURVE 2520 Uživatelský manuál stáhnout pdf (Strana 400)

100

101

File Transfers

Transferring Switch Configurations

Xmodem: Copying a Configuration File to a Serially

Connected PC or UNIX Workstation

To use this method, the switch must be connected via the serial port to a PC

or UNIX workstation. You will need to:

■ Determine a filename to use.

■ Know the directory path you will use to store the configuration file.

Syntax: copy < startup-config | running-config > xmodem < pc | unix >

copy config < filename > xmodem < pc | unix >

Uses Xmodem to copy a designated configuration file from the

switch to a PC or Unix workstation. For more on multiple

configuration files, refer to “Multiple Configuration Files” on

page 6-23.

For example, to copy a configuration file to a PC serially connected to the

switch:

1. Determine the file name and directory location on the PC.

2. Execute the following command:

3. After you see the above prompt, press

[Enter].

4. Execute the terminal emulator commands to begin the file transfer.

Xmodem: Copying a Configuration File from a Serially

Connected PC or UNIX Workstation

To use this method, the switch must be connected via the serial port to a PC

or UNIX workstation on which is stored the configuration file you want to

copy. To complete the copying, you will need to know the name of the file to

copy and the drive and directory location of the file.

A-26

1 2 ... 395 396 397 398 399 400 401 402 403 404 405 ... 543 544

Komentáře k této Příručce

Žádné komentáře

HP PROCURVE 2520 Uživatelský manuál Strana 400

Komentáře k této Příručce

Související produkty a manuály pro Software HP PROCURVE 2520