HP PROCURVE 6600 Uživatelský manuál stáhnout pdf (Strana 380)

100

101

Port Traffic Controls

Rate-Limiting

Syntax: rate-limit < bcast | mcast > in percent <0-100>

no rate-limit <bcast | mcast> in

Enables rate-limiting and sets limits for the specified

inbound broadcast or multicast traffic. Only the amount of

traffic specified by the percent is forwarded.

Default: Disabled

For example, if you want to set a limit of 50 percent on inbound broadcast

traffic for port 3, you can first enter interface context for port 3 and then

execute the rate-limit command, as shown in Figure 13-6. Only 50 percent of

the inbound broadcast traffic will be forwarded.

ProCurve(config)# int 3

ProCurve(eth-3)# rate-limit bcast in percent 50

ProCurve(eth-3)# show rate-limit bcast

Broadcast-Traffic Rate Limit Maximum %

Port | Inbound Limit Mode Radius Override

----- + ------------- --------- --------------

1 | Disabled Disabled No-override

2 | Disabled Disabled No-override

3 | 50 % No-override

4 | Disabled Disabled No-override

5 | Disabled Disabled No-override

Figure 13-6. Example of Inbound Broadcast Rate-limiting of 50% on Port 3

If you rate-limit multicast traffic on the same port, the multicast limit is also

in effect for that port, as shown in Figure 13-7. Only 20 percent of the multicast

traffic will be forwarded.

13-20

1 2 ... 375 376 377 378 379 380 381 382 383 384 385 ... 853 854

Komentáře k této Příručce

Žádné komentáře

HP PROCURVE 6600 Uživatelský manuál Strana 380

Komentáře k této Příručce

Související produkty a manuály pro Software HP PROCURVE 6600