HP PROCURVE 6600 Uživatelský manuál stáhnout pdf (Strana 827)

Network Out-of-Band Management (OOBM) for the 6600 Switch

Ping: ping [...] [source < ip-address | vlan-id | oobm>]

Management and Configuration Guide, page C-65

traceroute [...] [source <ip-address | vlan-id | oobm>]

Management and Configuration Guide, page C-67

This example shows setup and use of network OOBM using the commands

described above.

Assume that the figure below describes how you want to set up your data

Figure J-3. Example data center

Assume that you are configuring the switch in the left-hand rack to commu-

nicate on both the data and management networks. You might do the

■ Configure an IP address on the data network.

■ Verify that out-of-band management is enabled. (It is enabled by default.)

■ Configure an IP address on the management network.

■ Verify that the switch can communicate on both networks.

Žádné komentáře

HP PROCURVE 6600 Uživatelský manuál Strana 827