Hp Scripting Toolkit for Linux Uživatelský manuál

HP Scripting Toolkit for Linux User GuideAbstractThis document provides information about the Scripting Toolkit for Linux utilities and how best to us

5. To add a new device driver name:modprobe —f hpsa6. Load the channel interface driver for iLO:insmod /opt/hp/hp-ilo/bin/`uname -r`/hp_ilo.ko7. Mount

2. At the boot prompt, type bash and then press Enter. When the process is complete, a commandprompt appears.3. Load the network drivers using the loa

3 Booting and OS installationSYSLINUXSYSLINUX is a free third-party bootloader available on the SYSLINUX web page at http://syslinux.zytor.com/index.p

Setting up a PXE boot environment requires the following general steps:1. Set up a DHCP server with the appropriate options.2. Set up a TFTP server wi

server = /usr/sbin/in.tftpdserver_args = -s /tftpbootdisable = yesper_source = 11cps = 100 2}In this example, disabled is the default setting, and /tf

Booting from a USB drive keySome applications require the use of a writable medium. While booting from CD is not suitablefor this purpose, a USB drive

The scripting for these steps must be adapted to your server deployment process. In particular, besure to change the IP address and path of the NFS se

./ifhw ${HPDISCOVERY_FILE} allboards.xml "PCI:Smart Array 6i Controller" 2> /dev/nullif [ $? = 0 ] ; thencd ${TOOLKIT}/hpacuscripting./hp

echo ""echo "Rerun hardware discovery to find boot device"./hpdiscovery -f ${HPDISCOVERY_FILE}## use hwquery to fetch the boot dev

umount /mnt/dosumount ${NFS_MAIN}## unmount everything else#umount -a#echo "Rebooting"#sleep 5#/bin/reboot c:Microsoft Windows install_win.s

Notices© Copyright 2005, 2012 Hewlett-Packard Development Company, L.P.The information contained herein is subject to change without notice. The only

keyboard "us"zerombr yesclearpart --Linuxpart /boot --size 30part swap --size 128part / --size 100 --growinstallmouse genericps/2timezone Et

authconfigautoconfautomakeyp-toolsypbindypservzlibzlib-devel%postThe previous example contains a limited list of packages to be installed. Add to this

4 Scripting Toolkit utilitiesNative package formatsThe Scripting Toolkit utilities are available as standalone RPM and DEB packages.The Scripting Tool

Using Scripting Toolkit utilitiesThe Scripting Toolkit utilities control the installation process, read the source server configuration,and duplicate

REBOOT command-line examplesDescriptionCommand-line argumentThis command reboots the system to the A: drive.REBOOT A:This command reboots the system b

NOTE: The STATEMGR utility is not supported on 100 series servers.STATEMGR command-line syntaxSTATEMGR [/R | -R] [EVNAME] [/?]- or -STATEMGR [/W | -W]

RBSURESET command-line syntaxrbsureset [/?]RBSURESET command-line argumentsDescriptionCommand-line argumentThis argument displays help information.[/?

• Processor information• NIC information• PCI devices present in the system• HP Smart Array controller informationUser process decisions can be made b

DescriptionCommand-line argumentdiscovery into device names, such as "Smart Array 5iController."This argument specifies the query expression

Expression examplesResultExpression inputTrue if the Smart Array 5i Controller is found in the system"PCI:Smart Array 5i"True if the amount

Contents1 Introduction...7Scripting Toolkit...

HWQUERY command-line examplesDescriptionCommand-line argumentFor a hpdiscovery.xml file that contains<TotalRAM>768</TotalRAM>, HWQUERY pro

CONREP command-line syntaxconrep [-s | -l] [-xhardware_definition_file] [-fsystem_configuration_file] [-?]CONREP command line argumentsDescriptionComm

CONREP -s (Store to Data file) Example usage for HP ProLiant servers not using theOxx ROM familyTo extract the BIOS settings from an SL160z G6 server

<Slot1>00 </Slot1><BusDev1>00 78 </BusDev1><Rest1>c1 </Rest1></Section><Section name="Language"

<Index0>00 </Index0><Index1>01 </Index1><Index2>03 </Index2><Index3>02 </Index3><Index4>04 </

HPRCU command line argumentsDescriptionCommand line argumentThis argument saves the system configuration to a file.-sThis argument loads the system co

</hprcu>Using HPACUSCRIPTINGStarting with version 8.28.13.0, ACU Scripting is now a standalone application that is distributedwith the ACU CLI a

Creating an ACU script fileTo create a valid ACU script file, use one of the following methods:• Modify the sample custom input script (page 37).• Cre

PreferredPathMode = Auto|Manual; COMMENT: the following five entries are used to optimize thecontroller performance for videoMNPDelay = 0|1|2|...|60 ;

The options for each category are listed in the following table and described in more detail in theremainder of this section.DescriptionOptionsCategor

Using HPDISCOVERY...26HPDISCOVERY command-l

Action modeYou must specify an Action mode:• In Configure mode, you can create new arrays, but you cannot modify existing arrays. Thecontroller must b

ChassisNameEnter the user-defined character string that identifies the controller. You can use any of the followingcharacters in the string:a–z, A–Z,

All other controllerswithoutbattery-backed writecacheAll other controllerswith battery-backedwrite cacheRA4x00 with 48MBcacheRA4x00 with 16MBcacheRead

Array categoryThe Array category has the following options:• “Array” (page 43)• “Drive” (page 43)• “DriveType” (page 43)• “OnlineSpare” (page 44)Array

OnlineSpareThe value for this option determines whether the array specified previously in the script will beconfigured with spare drives.Default value

The following defaults apply:• For new logical drives, the default value is Disabled.• For existing logical drives, the default value is the current l

array, as long as the operating system supports logical drive extension. You cannot reduce thesize of the logical drive.CAUTION: Back up all data befo

The string can consist of the following:• A maximum of 16 characters• Embedded space characters but cannot end with a space character• Any of the foll

Comment or clarificationError messageError codebetween operations. Limit the number of such configurationchanges in the script.—Controller does not su

Comment or clarificationError messageError codeThis error message appears if you try to change the numberof spares in an array when the configuration

Drive...43DriveType...

Comment or clarificationError messageError codeThe scripted RAID Array ID is invalid. Use characters fromthe set a–z, A–Z, 0–9, !, @, #, *, (, ), ,, -

Comment or clarificationError messageError code—Invalid value for MNPDelay. Valid rangeis 0 (disabled) to 60 minutes.2882—Invalid controller configura

MeaningValueThere was no adapter or Emulex HBA found on this host.5There was an error retrieving the I/O address.6The WWID was invalid because of one

LO100CFG command-line argumentsDescriptionCommand-line argumentThis argument displays example XML to performconfiguration.-xThis argument outputs the

<serial_port mode="dedicated" /><nic mode="dhcp"><ipv4 address="10.10.10.18" mask="255.255.252.0&quo

HPQLAREP return codesMeaningValueThe command was completed successfully.0There was an invalid command line option.1There was a file open error.2There

You must then invoke the tool to load the contents of hba.ini input to the HBA NVRAM: hpqlarep/l hba.ini.Using HPONCFGHP offers support for the iLO fe

HPONCFG return codesMeaningValueThe script was sent successfully to the device.0The script could not be sent to the device. There is an errorin xml.1T

<DNS_NAME VALUE = "ILOD234KJ44D002"/><PRIM_DNS_SERVER value = "16.16.1.161"/><DHCP_ENABLE VALUE = "Y"/>

<F8_PROMPT_ENABLED VALUE="Y"/><REMOTE_CONSOLE_PORT_STATUS VALUE="3"/><REMOTE_CONSOLE_ENCRYPTION VALUE="N"

7 Documentation feedback...64Acronyms and abbreviations...

5 TroubleshootingTroubleshooting tableTroubleshootingIssueImproper use of the Toolkit utilities and modification of theCONREP data files can result in

6 Support and other resourcesInformation to collect before contacting HPBe sure to have the following information available before you contact HP:• So

Scripting Toolkit supportE-mail support for the Scripting Toolkit is available from the HP support website at http://h18013.www1.hp.com/products/serve

can be easily integrated to work with a supported version of HP Systems Insight Manager.HP Insight Remote Support 7.x provides anytime, anywhere perso

7 Documentation feedbackHP is committed to providing documentation that meets your needs. To help us improve thedocumentation, send any errors, sugges

Acronyms and abbreviationsACU Array Configuration UtilityBIOS Basic Input/Output SystemCONREP Configuration Replication utilityCPQACUXE Array Configur

TFTP Trivial File Transfer ProtocolUSB universal serial busVPD vital product dataWOL Wake-on LANWWID World Wide IDWWN World Wide NameWWPN worldwide po

IndexAacronyms and abbreviations, 65ACU script file, 37anaconda-ks.cfgsample file, 19BBOOTEXTRACT, 26arguments, 26command-line syntax, 26return codes,

return codes, 28iLO, 56install_win.shsample script, 19installationoperating system, 11unattended operating system, 15ISO imagearguments, 10LLO100CFG,

1 IntroductionScripting ToolkitThe Scripting Toolkit is a server deployment product for IT experts that delivers an unattendedautomated installation f

2 Deployment using the Scripting ToolkitDeployment overviewThe Scripting Toolkit includes a set of utilities for configuring and deploying servers in

Creating a network shareTo create a network share:1. Download the appropriate Scripting Toolkit package from the Scripting Toolkit website athttp://ww