Hp D2D100 Backup System Uživatelský manuál Strana 72

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 126
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 71
Network conguration
The details in this section reect the IP settings that were specied during installation. The HP D2D Backup
System supports D HCP and this is turned o n by default.
You m ay need to edit the details if there is a conict in the IP address, or you move the host to a different
network
node. Be aware that any changes you make to the net work set tings could affect how you
connect
again to the HP D2D Backup System. For example, if you change the IP address, you must use
the new a
ddress to log in from a web browser.
To edit network settings
1. Click Edit to make the details editable.
2. Make the required changes and click Update.
3. You must now reconnect to the HP D2D Backup System using the new settings.
If you have changed the IP address, you must use the new address to log in from a web
browser.
You will also need to edit the iSCSI Initiator on all hosts that are connected to the HP D2 D
Backup System, if you change the IP address. See The iSCSI Initiator on page 47.
72
The Web Management Interface
Zobrazit stránku 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 125 126

Komentáře k této Příručce

Žádné komentáře