Hp StorageWorks 3000 RAID Array Uživatelský manuál stáhnout pdf (Strana 55)

Using Command Console 3-9

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:

Part Number: AA-RBF2C-TE File Name: d-ch3 Using Command Console.doc Last Saved On: 12/5/00 10:20 AM

Establishing a SCSI Connection, Single Controller

If client’s host operating system is Windows NT or Windows 2000, you can

connect to, monitor and manage one storage subsystem over the SCSI bus.

Before you can connect to your storage subsystem over the SCSI bus, at least

one virtual disk must be configured for the controller. To create the first virtual

disk you must use a serial connection to the subsystem. The procedure to

create the first virtual disk is summarized as follows:

■ Establish a serial connection to your RAID using the Establishing a

Serial Connection, Single Controller procedure provided in this User’s

Guide.

■ Create a virtual disk. See “ Creating a Virtual Disk” .

■ Reboot your system.

■ Start the disk administrator, create the partition and assign the drive

letter for the two virtual disks.

To connect over the SCSI bus proceed, as follows:

1. Open the HSZ22 Storage window (Start|Programs|Command

Console|HSZ22 Storage window).

2. When the Connection Dialog box displays, select the SCSI option.

3. When the HSZ Management: Local SCSI Connection dialog box

appears, select a drive, then click OK (Figure 3– 7). Command Console

will shortly connect to the RA3000 and display the Storage window.

Figure 3-7. HSZ22 Management: Local SCSI connection dialog box

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 125 126

Žádné komentáře

Hp StorageWorks 3000 RAID Array Uživatelský manuál Strana 55