Hp StorageWorks EVA Controller HSG V8.8 Software Uživatelský manuál Strana 108

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 150
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 107
Using the Command Console LUN
108 Command Console V2.5 User Guide
Using an Initial Configuration
Your storage subsystem may not be configured when you first install it so there
may be no virtual disks for Command Console to use. You cannot configure
virtual disks because you cannot establish a connection. The CCL allows you to
establish the first connection.
Before you run SWCC, enable the CCL.
Note: If you are using SWCC with a SCSI-2 connection with an Agent running on
Windows NT, Windows 2000, or Windows Server 2003, you must disable the CCL
and create a virtual disk.
Preserving Virtual Disk IDs
In some operating systems, you may disable the CCL to preserve virtual disk IDs.
On Windows NT, Windows 2000, and Windows Server 2003 systems with
SCSI-2, the LUN appears as a drive letter that you can use only for this purpose.
In this case, you must use the controller’s CLI window to configure at least one
virtual disk for communication before you run Command Console.
Safely Disabling the CCL
To disable the CCL while the Command Console is connected, you need to have
at least one virtual disk remaining on your subsystem. Then, exit the Client and
stop running the Agent. Disable the CCL from the CLI window. Reconfigure the
Agent and the Client to use the remaining virtual disk for communications.
Zobrazit stránku 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 149 150

Komentáře k této Příručce

Žádné komentáře