HP E1368A Uživatelský manuál stáhnout pdf (Strana 36)

Example: Transfer

Switch Using Two

3-Port Switches

This example shows how to configure the HP E1368A Microwave Switch

to either route a signal directly to the output, or route it through an external

device before being output. For the example, two switches (channels 00

and 01) will be used. Figure 3-5 shows how to connect channels 00 and 01.

To route the signal directly, execute:

OPEN (@100,101) Connects port C to port 1 of both

channels and routes the signal

directly to the output.

To route the signal through the external device, execute:

CLOS (@100,101) Connects port C to port 2 of both

channels and routes the signal

through the external device to the

output.

Figure 3-5. Example: Transfer Switch (two channel)

36 Using the HP E1368A/69A/70A Modules Chapter 3

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 85 86

Žádné komentáře

HP E1368A Uživatelský manuál Strana 36