HP E1368A Uživatelský manuál stáhnout pdf (Strana 51)

ARM

The ARM subsystem selects the number of scanning cycles (1 through

32767) for each

INITiate command.

ARM

:COUNt <

number

MIN | MAX

:COUNt? [MIN | MAX]

:COUNt ARM:COUNt <number> MIN | MAX allows scanning cycles to occur a

multiple of times (1 to 32767) with one

INITiate command when

INITiate:CONTinuous OFF | 0 is set. MIN sets 1 cycle and MAX sets 32,767

cycles.

Parameters

Parameter Name Parameter Type Range of Values Default Value

number

numeric 1 - 32767 | MIN | MAX 1

Comments • Number of Scans: Use only numeric values between 1 and 32767

for the number of scanning cycles (default is 1).

• Related Commands: ABORt, INITiate:IMMediate

• *RST Condition: ARM:COUNt 1

Example Setting Ten Scanning Cycles

This example sets a Microwave Switch for 10 scans of channels 00 through

02. When the scan sequence completes, channels 00 through 02 (switches

00 through 02) are closed.

ARM:COUN 10 Set 10 scans per INIT command.

SCAN (@100:102) Scan channels 00-02.

INIT Start scan, close channel 00.

Chapter 4 HP E1368A/69A/70A Command Reference 51

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 85 86

Žádné komentáře

HP E1368A Uživatelský manuál Strana 51