HP EliteDesk 800 G4 Base Model Small Form Factor PC Uživatelský manuál stáhnout pdf (Strana 51)

6. Align the mounting screws on the drive with the J-slots on the sides of the drive bay. Press the drive into

the drive bay, and then slide the drive forward until it locks in place.

7. Connect the power cable (1) and data cable (2) to the rear of the hard drive.

NOTE: If the 2.5-inch hard drive is the primary drive, connect the other end of the data cable to the

dark-blue SATA connector on the system board labeled SATA0. If it is a secondary hard drive, connect the

other end of the data cable to one of the light-blue SATA connectors on the system board.

8. Rotate the drive cage back down to its normal position (Drive cage on page 40).

9. Reassemble the computer.

Drives 43

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 143 144

Žádné komentáře

HP EliteDesk 800 G4 Base Model Small Form Factor PC Uživatelský manuál Strana 51