HP OMNIBOOK 800 Uživatelský manuál stáhnout pdf (Strana 47)

Expanding the OmniBook

Connecting External Devices

3-13

To insert a PC card into the lower slot

1. Turn over the OmniBook, release the two latches on the bottom of the slot tray,

and pull out the tray.

2. Lift or push the plastic spacer out of the tray. (Save the spacer in case you

remove the card later—it keeps dust and dirt from getting inside the case.)

3. Install the new card into the tray with its face up and its connector holes toward

the metal tabs at the end of the tray.

4. Slide the tray fully into the slot and secure its latches.

Read-Write Switch. If the card has a read-write switch, make sure it is in its “read-

write” position if you want to do data storage. If, on the other hand, you want to

protect data from being changed, set the switch to its “read-only” position.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 87 88

Žádné komentáře

HP OMNIBOOK 800 Uživatelský manuál Strana 47