HP OMNIBOOK 800 Uživatelský manuál stáhnout pdf (Strana 71)

Troubleshooting

Solving Basic Problems

5-7

If the computer seems slow

• Check that Cache is enabled (in the System Configuration Utility, open the

System menu and check Enable Cache).

• You might need to install more RAM. The memory-expansion boards are HP

part numbers F1168A (16 MB), F1169A (32 MB) and F1119A (64 MB).

• Try pressing the reset button.

If the infrared connection does not work

• Try re-aligning the two devices to align their infrared ports. Make sure the two

devices are no more than 0.5 meter apart.

• Check the settings in your communications software and in the OmniBook's IR

Monitor. IrDA must be enabled.

If a parallel device does not work

• The bus speed of the device may be too slow for the OmniBook. Try decreasing

the OmniBook’s bus speed by pressing

FN+MINUS (-). You can restore the

normal speed by pressing

FN+PLUS (=).

If you cannot install Windows NT 3.51

• In the System Configuration Utility, under the System menu, Boot Devices,

enable the checkbox Force PCI Bridge Configuration.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 87 88

Žádné komentáře

HP OMNIBOOK 800 Uživatelský manuál Strana 71