Hp EVA Array iSCSI Connectivity Option Uživatelský manuál Strana 42
- Strana / 229
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Field direct con
nect—HP StorageWorks EVA or EVA4400 iSCSI connectivity
option with direct connect at tachment mode
Figure 1 illustrates the direct connect iSCSI–Fibre Channel attachment mode configuration.
NOTE:
This option is supported only on the EVA4400 running XCS 9.000 or later firmware, or
EVA4 x0 0/6x00/8x00 running XCS 5.100 or later firm ware.
To install field direct connect with direct connect attachment mode:
1.
Rack mount the mpx100/100b. (See “Rack mount the mpx100/100b”onpage43.)
2. Connect one end of the black Fibre Channel cable into the FC1 port of the mpx100/100b
(Figure 1 on page 22).
3. Connect the other end of the black Fibre Channel cable into an available FP port of the HSV top
controller.
4. Connect one end of the black Fibre Channel cable into the FC2 port of the mpx100/100b
(Figure 1 on page 22).
5. Connect the other end of the black Fibre Channel cable into an available FP port of the HSV
bottom controller.
6. Install supplied p ort loopback connects on any unused HSV controller host ports.
7. Set the HSV controller ports to direct connect topology:
NOTE:
For the EVA4400, see the product installation documentation.
a. Press the Down Arrow key on the EVA front panel. System Information is displayed.
b. Press the Right Arrow key. Versions is displayed.
c. Press the Down Arrow key. Host Port Config is displayed.
d. Press the Right Arrow key. Fabric is displayed.
e. Press the Down Arrow key. Direct Connect is d isplayed.
f. Press the Right Arrow key. Port 1 is displayed.
g. Press the Down Arrow key until the port that you want to change to Direct Connect
Mode is displayed.
h. Press Enter.
i. Repeat the process for the other controller.
8. Continue w ith “Connect the mpx10 0/10 0b to an IP switch” on page 44.
Field fabric attach—HP StorageWorks EVA or EVA4400 iSCSI connectivity
option with fabric at tach mode
Figur
e7on p age 27 illustrates the fabric iSCSI–Fibre Channel attachment mode configuration.
To ins
tall the iSCSI connectivity option with fabric attachment mode:
1.
Rack mount the mpx100/100b. (See “Rack mount the mpx100/100b”onpage43.)
2. Install SFPs in the mpx100/100b ports ( FC1, FC2) and the top and bottom controller FP ports.
3. Connect one end of the orange Fibre Channel c able to the FC1 SFP por t of the mpx100/100b.
Connect the other end of the orange Fibre Channel cable to any available SFP port on the
Fib
re Channel switch.
42
Installing and upgrading EVA iSCSI connectivity
- HP StorageWorks 1
- Contents 3
- About t his guide 17
- Document conven 18
- Rack stability 18
- HP technical suppor t 19
- Subscription service 19
- Other HP websites 19
- About this guide 20
- 1OverviewoftheEVAand 21
- Storage System 22
- Hardware support 25
- Software support requirements 26
- Secur ity 28
- Business C opy 28
- 2Configuration rules and 29
- Operating systems supported 30
- Initiator rules 31
- Windows iSCSI In 32
- OpenVMS hardware requirements 33
- Supported featu 36
- HP Command View E 37
- Supported IP network adapters 37
- IP network requirem ents 38
- Adds a second mpx100 40
- Field direct con 42
- Rack mounting the mpx100/100b 43
- Starting the mp 45
- StorageWorks Command View EVA 45
- Figure 12 H 47
- 8. Enter the I 47
- 4Configurin g the mpx 100/100b 49
- Power LED (green) 50
- Heartbeat LED (g reen) 50
- System Fault LED (amber) 50
- Maintenance button 51
- FC ports 52
- Transceivers 53
- Management Eth 54
- Serial port 54
- Installation and maintenance 55
- Setting the server IP address 56
- Configuring the mpx100/100b 58
- Configuring the 60
- (optional) 60
- Configuring the mpx100/100 b 64
- (single-path 68
- Figure 25 Discover targets 69
- (Figure 26) 69
- Assigning device names 79
- Target bindings 80
- Unmounting file systems 81
- -i iscsi 83
- Initiator using the CLI 84
- Accessing iSCSI disks 85
- Configuring TCP/ 90
- IP services 90
- Configuring VL ANs 90
- Configuring target discovery 90
- Starting th e iSCSI Initiator 92
- Stopping the iSCSI Initiator 92
- Overview 95
- The mpx100/100b perspective 96
- 50:05:08:b4:01:01:f6:78 97
- 50:05:08:b4:01:01:f6:7c 97
- Figure 49 Add Features page 101
- Microsoft MPIO 107
- (see Figure 62) 111
- Managing multipathing 113
- MPxIO overview 116
- Setting configu 117
- Verifying confi 119
- Verifying that a 120
- EVA iSCSI Connectivity 121
- Option release notes 121
- Verify mpath-s 122
- Displaying path information 124
- Manual path switching 125
- Disk Arrays 126
- HPDM Multipath restrictions 127
- 7UsingHPCommandViewEVAto 129
- View EVA 131
- Command View EVA 131
- 8 iSCSI Boot from SAN 133
- HP iSCSI 133
- Boot for Wi 133
- QLogic iSCSI Host Bus adapter 134
- QLogic BIOS Readme 135
- 3. Shut down the host 136
- Initiator Upgrade License 137
- Installing t 138
- Upgrade Lic 138
- A Command line interface 141
- Admin command 142
- Beacon command 143
- Date command 143
- Clear command 144
- FRU command 144
- Help command 145
- History comman 147
- Image command 147
- Initiator command 147
- Logout command 148
- LUNmask command 148
- Password command 150
- Ping command 151
- Quit command 151
- Reboot comm and 151
- Reset command 152
- Save command 152
- Set command 152
- Set CHAP comma 153
- Set FC command 153
- Set Features command 154
- Set iSCSI command 154
- Set iSNS command 155
- Set MGMT command 156
- Set NTP command 156
- Set Properties 157
- Set SNMP command 157
- Set System command 158
- Set VLAN comm 158
- Show command 158
- Show Chap command 159
- Show Features command 160
- Show Logs Command 160
- Show LUNinfo 160
- Show Perf command 160
- Show Properties command 161
- Show System command 161
- Show MGMT comma 162
- Show iSCSI command 162
- Show FC command 162
- Show Initiators command 163
- Show iSNS command 164
- Show LUNs command 164
- Show LUN Mask command 165
- Show NTP command 166
- Show SNMP comma 167
- Show Stats command 168
- Show Targets command 171
- Show VLAN comma 172
- Target command 172
- Chassis diag 173
- Power-on self-t 174
- Initiator 175
- Troubleshoo 176
- HP Command View EVA refresh 177
- CLogdata 179
- Fibre Channel driver 180
- Err or log messag 181
- ID Log message Mes 182
- Description 182
- User modules 186
- Fatal log messages 187
- FC driver 189
- Protocol 191
- D Simple Net work Management 191
- Management Information Base 192
- Network port table 193
- FC port table information 195
- Sensor table 197
- Notifications 199
- E Setting up a uthen tication 203
- Setting up authentication 204
- Enabling singl 205
- Enabling bi 209
- F S aving an d restorin g the 213
- G Regul atory compliance and 217
- Regulatory comp 218
- Laser device 218
- European Union notice 219
- BSMI notice 219
- Japanese notice 219
- Batter y repl 220
- Power cords 220
- Japanese power cord statement 221
- Glossary 223
Související produkty a manuály pro Počítačové příslušenství Hp EVA Array iSCSI Connectivity Option
Počítačové příslušenství Hp Virtual Connect 1.10Gb-F Ethernet Module for c-Cla Uživatelský manuál
(13 stránky)
(13 stránky)
Počítačové příslušenství Hp XP Racks Uživatelský manuál
(764 stránky)
(764 stránky)
Počítačové příslušenství Hp StoreFront Analytics for VMware Software Licenses Uživatelský manuál
(44 stránky)
(44 stránky)
Počítačové příslušenství Hp NC364T PCI Express Quad Port Gigabit Server Adapte Uživatelský manuál
(20 stránky)
(20 stránky)
Počítačové příslušenství Hp NC373F PCI-E Multifunction 1000SX Gigabit Server A Uživatelský manuál
(17 stránky)
(17 stránky)
Počítačové příslušenství Hp NC370T PCI-X Multifunction Gigabit Server Adapter Uživatelský manuál
(23 stránky)
(23 stránky)
Počítačové příslušenství Hp StorageWorks Enterprise File Services WAN Accelera Uživatelský manuál
(194 stránky)
(194 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.036 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce