Hp Netserver L Server series Uživatelský manuál Strana 125

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 146
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 124
Chapter 13 Alternative Rack Mounting (4–Post)
119
Marking the Columns
To make it easier to install the slides in the rack, you may want to mark the
columns to indicate the server placement. Use the HP Rack Configuration Tools to
determine where in the rack to mount the HP Netserver. The tools are available at
the following URL:
http://www.hp.com/netserver/support
Use a marking pen or masking tape to mark the server position on the inside of the
front and rear columns, as shown in Figure 13-2.
The slides will use the second column hole, counting from the base of the
HP Netserver.
Inside Face of Column
Masking
Tape or
Marker
Bottom of
HP Netserver
Left
Side
Right
Side
Rear of
Rack
Mark this face of
the columns with
masking tape
or marker pen.
Front of
Rack
Figure 13-2. Marking Server Placement
Zobrazit stránku 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 145 146

Komentáře k této Příručce

Žádné komentáře