Hp ProLiant DL385 G7 Server Uživatelský manuál Strana 30
- Strana / 111
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Operations 30
For a single-processor configuration, four fans and two blanks are required in specific fan bays for
redundancy. A fan failure or missing fan causes all fans to spin at high speed. A second fan failure or
missing fan causes an orderly shutdown of the server.
Installing more than the required number of fans in a single-processor configuration is not a thermally
supported configuration.
For a dual-processor configuration, six fans are required for redundancy. A fan failure or missing fan
causes all fans to spin at high speed. A second fan failure or missing fan causes an orderly shutdown of
the server.
The server supports variable fan speed. The fans operate at minimum speed until a temperature change
requires a fan speed increase to cool the server. The server shuts down during the following temperature-
related scenarios:
• At POST and in the OS, iLO 3 performs an orderly shutdown if a cautionary temperature level is
detected. If the server hardware detects a critical temperature level before an orderly shutdown
occurs, the server performs an immediate shutdown.
• When the Thermal Shutdown feature is disabled in RBSU, iLO 3 does not perform an orderly
shutdown when a cautionary temperature level is detected. Disabling this feature does not disable
the server hardware from performing an immediate shutdown when a critical temperature level is
detected.
CAUTION: A thermal event can damage server components when the Thermal Shutdown
feature is disabled in RBSU.
- HP ProLiant DL385 G7 Server 1
- User Guide 1
- Intended audience 2
- Contents 3
- Component identification 7
- Systems Insight Display LEDs 8
- Rear panel components 10
- Rear panel LEDs and buttons 11
- System board components 12
- System board switches 13
- NMI functionality 14
- Hard drive numbering 15
- SAS and SATA hard drive LEDs 16
- PCI riser cage LEDs 17
- Battery pack LEDs 18
- FBWC module LEDs 20
- Hot-plug fans 20
- Component identification 21 21
- Operations 22
- Remove the access panel 23
- Install the access panel 24
- Remove the PCI riser cage 25
- Install the PCI riser cage 26
- Remove the air baffle 28
- Hot-plug fan operation 29
- Operations 30 30
- Rack planning resources 31
- Optimum environment 32
- Temperature requirements 33
- Power requirements 33
- Rack warnings 34
- Installing hardware options 34
- Registering the server 37
- Introduction 38
- Processor option 38
- Install the heatsink 43
- Install the air baffle 43
- Memory configurations 47
- Population order 48
- Population rules 48
- Population guidelines 49
- Memory bus speed 49
- Installing DIMMs 50
- Expansion board options 53
- PCI riser board option 56
- Cabling 57
- FBWC battery cabling 58
- BBWC battery cabling 58
- Configuration and utilities 59
- SmartStart Scripting Toolkit 59
- Using RBSU 60
- Auto-configuration process 60
- Boot options 61
- BIOS Serial Console 61
- Management tools 63
- Safety and security benefits 64
- Diagnostic tools 65
- Keeping the system current 66
- Version control 67
- ProLiant Support Packs 67
- Firmware 67
- HP Smart Update Manager 68
- Care Pack 68
- Troubleshooting 69
- Symbols on equipment 70
- Warnings and cautions 70
- Symptom information 71
- Loose connections 72
- Service notifications 73
- Troubleshooting flowcharts 73
- General diagnosis flowchart 74
- Symptoms: 76
- Troubleshooting 78 78
- POST problems flowchart 79
- OS boot problems flowchart 80
- • Redundancy failure 83
- Troubleshooting 84 84
- Battery replacement 85
- FCC rating label 86
- Class A equipment 86
- Class B equipment 86
- Modifications 87
- • EMC Directive 2004/108/EC 88
- Japanese notice 89
- BSMI notice 89
- Battery replacement notice 90
- Korean notice 90
- Chinese notice 90
- Laser compliance 90
- Electrostatic discharge 92
- Specifications 93
- Power supply specifications 94
- Technical support 97
- Technical support 98 98
- Technical support 100 100
- Customer Self Repair 101
- Reparo feito pelo cliente 101
- Technical support 102 102
- Technical support 103 103
- Technical support 104 104
- Acronyms and abbreviations 105
- Index 108 108
- Index 109 109
- Index 110 110
- Index 111 111
Související produkty a manuály pro Počítačový hardware Hp ProLiant DL385 G7 Server
(80 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.075 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce