HP Pavilion xu Notebook PC series Uživatelská příručka stáhnout pdf (Strana 101)

Add-On Devices

Installing Additional RAM

Reference Guide 101

4. Carefully insert the edge of the RAM module into the connector at about a 30° angle

until it is fully seated. Then press down on both sides until the latches snap closed.

5. Replace the cover.

6. Insert the battery.

Note

Windows 98 only: if you increase your computer’s memory to more than 512 MB, the

computer will not be able to hibernate unless you also increase the size of the Utility

partition on the hard disk—see “To recover the factory installation of your hard disk” on

page 142.

You can also replace the system RAM module beneath the keyboard—see “To replace

the system RAM module” on page 102.

To remove a RAM expansion module

You may want to remove a RAM module so you can install a larger one.

CAUTION

Your computer’s chips are extremely sensitive to static electricity, and can be

permanently damaged by it. Handle the RAM module only by its edges. Before

installing the memory module, discharge your body’s static electricity by touching

the metal shielding around the connectors on the rear of the computer.

1. Click Start, Shut Down, Shut down (Windows 98 or 2000) or Start, Turn Off

Computer, Turn Off (Windows XP).

2. Important: unplug the AC adapter, if present, and remove the main battery.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 180 181

Žádné komentáře

HP Pavilion xu Notebook PC series Uživatelská příručka Strana 101