HP PSC 2510 Photosmart All-in-One Printer Uživatelská příručka stáhnout pdf (Strana 23)

reference guide

load originals and load paper

load originals & paper

load the input tray

1 Remove the output tray, and slide the paper-width and paper-length guides

to their outermost positions.

2 Tap a stack of paper on a flat surface to align the edges, and then check to

make sure all of the paper in the stack is the same size and type.

3 Slide the short edge of the paper forward into the input tray with the print

side down until it stops. If you are using letterhead, insert the top of the

page first with the print side down.

4 Slide the paper-width and paper-length guides inward until they stop at the

edges of the paper. Make sure that the paper stack lies flat in the input tray

and is stacked no higher than the paper-length guide.

5 Replace the output tray.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 245 246

Žádné komentáře

HP PSC 2510 Photosmart All-in-One Printer Uživatelská příručka Strana 23