HP Web Jetadmin Software Uživatelský manuál stáhnout pdf (Strana 329)

NOTE: To ensure that the cleaning process runs automatically and without intervention, make sure that

the paper size you specify is always available in the printer.

Auto Continue

Choose to have a non-critical error message appear for ten seconds before the device resumes operation. Select

O for Auto Continue to require you to acknowledge non-critical error messages by pressing Continue on the

device before the device resumes operation.

Use the following steps to congure this option:

1. To enable Auto Continue, select On.

2. To disable Auto Continue, select O. You will have to acknowledge non-critical error messages by pressing

Continue on the device before the device resumes operation.

Auto Recovery

Use this option to enable or disable the Auto Recovery feature on the device. If this option is enabled and an

unrecoverable error occurs in the device rmware, the device automatically turns o and turns on to recover

from the error.

To enable the Auto Recovery feature on the device, select the Enabled option.

To disable the Auto Recovery feature on the device, select the Disabled option.

Auto Sense Mode

Use this option to optimize device settings for certain media types that can be detected automatically by the

printer. Not all printers will support all of the sensing methods, or sensing from every tray. Sensing options may

include:

●

Full Sensing: For each sheet of paper that is picked up from the tray, the product detects light paper, plain

paper, heavy paper, glossy paper, tough paper, and transparencies.

●

Expanded Sensing: For the rst few sheets of paper that is picked up from the tray, the product detects

light paper, plain paper, heavy paper, glossy paper, tough paper, and transparencies. The product assumes

the rest of the pages are of the same type.

●

Transparency Only: The product distinguishes between transparencies and non-transparencies.

Use the following steps to congure this option:

1. Select the setting for Tray 1 Sensing to congure how the device detects media in Tray 1.

2. Select the setting for Tray N Sensing (if available) to congure how the device detects media in trays 2

through N.

AutoSend

Use this option to enable the device to periodically send usage information about the device’s congurations and

supplies to a list of recipients.

ENWW Device Conguration Options for Device 303

1 2 ... 324 325 326 327 328 329 330 331 332 333 334 ... 491 492

Žádné komentáře

HP Web Jetadmin Software Uživatelský manuál Strana 329