HP 4400 Instalační příručka stáhnout pdf (Strana 17)

2. Insert a screw through the bottom hole of the new bracket and loosely secure the bracket to the

rear of the rail.

Figure 2 Inserting screw into the new bracket

Figure 3 Attaching the brackets

3. Repeat Step 1 and Step 2 for the remaining rail.

Converting the rails

The rail kit supplied with the disk enclosure comes configured for square-hole racks.

IMPORTANT:

Do not remove the pins from the ends of the rails unless you are converting the rails for use in

round-hole racks. These load-bearing pins are designed to fit through the holes without being removed.

To convert the rails for a round-hole rack:

1. Locate the bag of eight round-hole pins included in the rail kit.

HP StorageWorks 4400 Enterprise Virtual Array Installation Guide 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Žádné komentáře

HP 4400 Instalační příručka Strana 17