HP Vectra 520 Instalační příručka stáhnout pdf (Strana 79)

100

101

3-24 Hardware installation: Application Module (SNN/SNN-E)

553-4001-111 Standard 1.0 March 1997

Table 3-3 lists the assignable ports for the SNN/SNN-E hardware platform

as they appear on the Meridian MAX Communication Port Assignment

screen, and shows the type of device which can be connected to each port.

As you decide upon the device to connect to each port, enter the device

name in the space provided. If you are assigning a supervisor workstation,

remote login, or network link, you must specify the type of connection such

as direct, dial-up at 2400 baud, and so on. This information is requested

during the software installation.

Figure 3-7 shows the Generic Input/Output connector panel for the

SNN/SNN-E hardware platform. It identifies the ports which are connected

to the multiport cables. The other end of the cables are connected to the

peripherals identified by you in Table 3-3.

Please note the following abbreviations:

• HSL (High-Speed Link)

• LML (Load Management Link)

• NL [Network Link (NetLink)]

• PRT (printer)

• SW (supervisor workstation)

Please note the following abbreviations for connection type:

• DC (direct connection)

• 24 (dial-up connection at 2400 baud)

• 96 (dial-up connection at 9600 baud)

• 96S (serial connection at 9600 baud)

• 192S (serial connection at 19 200 baud)

Note: The “Connection type” column in the following table lists all of

the possible connections. Some connection types cannot be applied to

some devices available. For example, the only connection type possible

for a printer is direct connection.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 502 503

Komentáře k této Příručce

Žádné komentáře

HP Vectra 520 Instalační příručka Strana 79

Komentáře k této Příručce

Související produkty a manuály pro Barebones pro PC / pracovní stanice HP Vectra 520