HP Vectra XE310 Průvodce řešením problémů stáhnout pdf (Strana 13)

Upgrading and Replacing PC Hardware

Installing a Memory Module

WARNING For your safety, disconnect the power cord and all external cables.

1 Switch off the PC, disconnect the power cord and remove the PC’s side panel and air flow guide (refer

“Removing and Replacing the Side Panel & Air Flow Guide” on page 12).

2 Lay the PC on its side so you can access the system board.

XE310 Series 1

XE310 Series 2

Position of memory modules

3 Either remove the module you want to replace or locate an empty memory module socket.

4 Make sure that the socket’s clips are open.

5 Align the grooves on the bottom of the module with the corresponding marks on the socket and push

it firmly into place. The clips close automatically.

6 Replace the PC’s air flow guide and side panel (refer to “Removing and Replacing the Side Panel & Air

Flow Guide” on page 12).

7 Reconnect the power cord.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Žádné komentáře

HP Vectra XE310 Průvodce řešením problémů Strana 13